Common Tenpoint Crossbow Problems: New 2024 Guide

In this article, we explore common problems encountered with TenPoint crossbows, providing you with reliable insights from a trusted source to help you overcome any challenges and ensure your hunting experience remains top-notch

Here are Tenpoint Crossbow Problems at a Glance:

• The TenPoint Vengent S440 crossbow Problems include decocking issues, accuracy problems, and bolts coming loose
• The TenPoint Nitro X crossbow problems such as string issues, and Accudraw problems are commonly faced by its users
• Grouping issues, string serving trouble and firepower and safety system problems are the potential problems with the TenPoint Vapor RS470 crossbow. 
• The TenPoint Stealth NXT crossbow has been reported to have issues like string wear, string, and cable damage and nock compatibility.
• The TenPoint Turbo XLT II crossbow has had some reported problems such as arrow release issues, trigger pulling problems, and recall.
• The TenPoint Nitro 505 crossbow problems include blown limbs and string wear, noise, and dry firing problems. 
• The common problems of the TenPoint Nitro XRT crossbow include cam lean, string and cable failure, and dry firing.
• The TenPoint Titan M1 crossbow owners have reported accuracy issues, decocking mechanism issues, loose bolts, and trigger problems. 
• Falling rest, accuracy issues, cocking difficulty are the reported problems related to the TenPoint Turbo M1 crossbow.
• The TenPoint Turbo S1 crossbow problems include bearing issues and a crank handle. 
• Scope alignment issues and string wear off are the reported problems related to the TenPoint Siege RS410 crossbow
• Crank issues and trigger problems are commonly reported problems related to the TenPoint Viper S400 crossbow.

Tenpoint Crossbow Problems

TenPoint Vengent S440 Problems

The TenPoint Vengent S440 crossbow Problems include decocking issues, accuracy problems and bolt coming loose. Here are the details:

• Decocking issue: Some users have reported difficulties in decocking the Vengent S440. They have followed the instructions provided by TenPoint but have been unable to decock the crossbow successfully.
• Accuracy problems: Poor accuracy has been reported by some users. This can be caused by improper cocking, loose screws or nuts, or poor tuning of the crossbow.
• Bolts coming loose: There have been reports of bolts coming loose during firing, which can reduce accuracy and pose safety concerns. It is recommended to check the bolts before each use and secure them firmly if needed.

Tenpoint Nitro X Problems

The TenPoint Nitro X crossbow problems such as string issues, Accudraw problems are commonly faced by its users. Here are the details

• String and cable issues: Some users have experienced problems with the string and cables on the Nitro X. This includes the string coming off the cam, broken serving on the string and cable, and issues with the Acudraw crank handle.
• Accudraw problems: There have been reports of issues with the Accudraw system, which is used for cocking the crossbow. Users have mentioned problems with the sled not reaching the trigger box or failing to function properly.
• Other miscellaneous issues: Users have reported various other problems, such as bolts coming loose, cam lean, and even instances of the crossbow exploding (although this appears to be a rare occurrence).

Tenpoint Vapor Rs470 Problems

Grouping issues, string serving trouble and firepower and safety system problems are the potential problems with the TenPoint Vapor RS470 crossbow. Here are the details:

• Grouping issues: Some users have reported difficulties achieving tight groupings with the Vapor RS470, particularly at longer distances. This could be attributed to various factors, including arrow selection, tuning, or individual shooting technique.
• String serving trouble: It appears that some users have experienced issues with the factory string serving on the Vapor RS470. This could involve serving separation or breakage, which may impact the crossbow’s performance and reliability.
• Firepower and safety system problems: There have been mentions of potential firepower issues if the crossbow is not cocked properly or if the trigger mechanism is damaged. Additionally, there have been reports of safety system problems, although specific details are not provided.

Tenpoint Stealth Nxt Problems

The TenPoint Stealth NXT crossbow has been reported to have issues like string wear, string, and cable damage and nock compatibility. Here are the details:

• String Wear: Some users have reported wear on the serving of the string, specifically on the left side of the rail. This could be due to various factors such as a bad string or improper maintenance.
• String and Cable Damage: There have been reports of the string and cables getting damaged or banged up near the attachment points on the cams. This can affect the performance and accuracy of the crossbow.
• Nock Compatibility: TenPoint made a switch from Omni Nocks to Alpha Nocks due to the narrow string angle not sitting well on the Omni Nocks. However, there have been complaints about the transition and some users have experienced issues with the nocks.
• Customer Service: There have been mixed reviews about TenPoint’s customer service. While some users have had positive experiences, others have expressed dissatisfaction with the level of support provided.

Tenpoint Turbo Xlt 2 Problems

The TenPoint Turbo XLT II crossbow has had some reported problems such as arrow release issues, trigger pulling problems, and recall. Here are the details

• Arrow Release Issue: Some users have experienced problems with the arrow release, where the trigger gets jammed and the arrows don’t release on time. This can create friction and block the arrow’s path.
• Trigger Pulling Problem: There have been reports of users finding the trigger pull weight too heavy or uncomfortable.
• Recall: There was a voluntary product recall for certain models of TenPoint crossbows, including the TenPoint Turbo XLT II. This recall was related to potential safety issues, and affected crossbows manufactured from 2011 to 2014.

Tenpoint Nitro 505 Problems

The TenPoint Nitro 505 crossbow problems include blown limbs and string wear, noise, and dry firing problems. here are the details:

• Blown Limbs and String Wear: Some users have mentioned concerns about blown limbs and string wear as potential issues with the TenPoint Nitro 50These issues may be more prevalent due to the high speed and power of the crossbow.
• Noise: The Nitro 505, like other high-speed crossbows, may produce some noise when fired. While it is reported to be quieter than some other models, the release of energy can still generate noticeable noise.
• Dry Firing Problem: One of the core issues mentioned is the dry firing problem. Dry firing refers to firing the crossbow without an arrow, which can cause damage to the device. It is important to always use the crossbow with an arrow to avoid this problem.
• Arrow Retrieval: Some users have mentioned difficulties in pulling arrows from the target due to the high speed and force of the Nitro 50This may require additional effort or specialized tools for arrow retrieval.

Tenpoint Nitro Xrt Problems

The common problems of the TenPoint Nitro XRT crossbow include cam lean, string and cable failure, and dry firing. here are the details.

• Timing or Cam Lean: Some users have reported concerns about cam lean or timing issues with the Nitro XRT. It is recommended to have any significant cam timing variation corrected to ensure optimal performance.
• String and Cable Failure: There have been reports of string and cable failure with the Nitro XRT. It is important to regularly inspect the condition of the strings and cables and have them replaced if any signs of wear or damage are present.
• Dry Firing: As with any crossbow, dry firing (firing without an arrow) can cause damage to the Nitro XRT. It is crucial to always use an arrow when firing the crossbow to avoid potential problems.

Tenpoint Titan M1 Problems

The TenPoint Titan M1 crossbow owners have reported accuracy issues, decocking mechanism issues, loose bolts, and trigger problems. here are the details

• Accuracy Issues: Some users have reported accuracy problems with the TenPoint Titan M1, even after re-tuning the bow. This could potentially affect shooting performance and result in missed targets.
• Decocking Mechanism: There have been reports of issues with the decocking mechanism on the TenPoint Titan M1. Users have mentioned that the new decock model has a mini stirrup that only protects the front of the bow, which may limit the ability to safely decock the crossbow.
• Bolt Loosening: Users have reported that bolts on the TenPoint Titan M1 can come loose during firing, which can affect accuracy and pose safety concerns. It is important to regularly check and secure the bolts before each use.
• String and Trigger Problems: Some users have mentioned problems with the strings and triggers on the TenPoint Titan M1. These issues may require maintenance or replacement to ensure optimal performance.

Tenpoint Turbo M1 Problems

Falling rest, accuracy issues, cocking difficulty are the reported problems related to the TenPoint Turbo M1 crossbow. Here are the details

• Falling off Rest: One user reported that their TenPoint Turbo M1 fell off their shooting rest, but it is unclear if this is a widespread issue or an isolated incident.
• Accuracy Issues: Some users have reported accuracy problems with the TenPoint Turbo M1, even after re-tuning the bow. This could potentially affect shooting performance and result in missed targets.
• Trigger Pull Weight: The trigger pull weight on the TenPoint Turbo M1 is reported to be heavier than other crossbows, which can take some getting used to for shooters accustomed to lighter triggers. This can potentially impact accuracy.
• Cocking Difficulty: The TenPoint Turbo M1 requires a significant amount of force to cock, which can make it challenging for weaker shooters or those with limited dexterity. This can also lead to misaligned bolts and reduced accuracy.
• String and Trigger Problems: Some users have mentioned issues with the strings and triggers on the TenPoint Turbo M1. These issues may require maintenance or replacement to ensure optimal performance.

Tenpoint Turbo S1 Problems

The TenPoint Turbo S1 crossbow problems include bearing issues and a crank handle. Here are the details.

• Bearing Issues: One user reported a bearing falling apart in the trigger box of their TenPoint Turbo S1. They were seeking information about the size of the bearing and potentially replacing it with a higher-quality one. It is unclear if this is a common issue or an isolated incident.
• Crank Handle: There was a mention of a strange crank handle on the Turbo S1 in one of the forum threads. However, the specific problem or concern related to the crank handle was not mentioned.
• Accuracy: Some users have reported accuracy issues with the TenPoint Turbo S1, with one user mentioning that the crossbow shot slower than expected with a specific arrow weight. However, it is important to note that individual experiences may vary.

Tenpoint Siege Rs410 Problems

Vague instruction manual and string wear off are the reported problems related to the TenPoint Siege RS410 crossbow:

• Vague Instruction Manual: Some users have mentioned that the instruction manual for the TenPoint Siege RS410 is not very clear or detailed, which can make it challenging for users, especially beginners, to properly assemble or operate the crossbow.
• String Wear-off: There have been reports of the string on the TenPoint Siege RS410 wearing off quickly. This can potentially affect the performance and accuracy of the crossbow and may require regular string replacement.
• Rail Issues: Users have complained about rail issues with the TenPoint Siege RS410. This can include problems with uncontrolled friction when pulling the strings back, which can impact the smoothness and consistency of the shot.
• Scope Alignment: There have been mentions of scope alignment issues with the TenPoint Siege RS410. Users have reported difficulties in getting the scope properly aligned, which can affect accuracy and shooting performance.
• Trigger and Cocking Issues: Some users have experienced problems with the trigger and cocking mechanism of the TenPoint Siege RS410. This can include issues with the trigger pull weight, trigger sensitivity, or difficulties in cocking the crossbow.

Tenpoint Viper S400 Problems

Crank issues and trigger problems are commonly reported problems related to the TenPoint Viper S400 crossbow. Here are the details

• Crank Issue: There have been reports of issues with the crank mechanism on the TenPoint Viper S400. Users have mentioned that the crank may not work properly, causing difficulties in cocking or decocking the crossbow.
• Trigger Problems: Some users have experienced problems with the trigger mechanism on the TenPoint Viper S400. This can include issues with the trigger pull weight, sensitivity, or reliability.
• Noise: There have been mentions of noise issues with the TenPoint Viper S400. Some users have reported that the crossbow produces more noise than expected during shooting, which can potentially affect hunting or shooting experiences.
• Accuracy: While the TenPoint Viper S400 is generally praised for its accuracy, there have been a few reports of accuracy issues. Some users have mentioned that the crossbow may not consistently group arrows tightly or may require additional adjustments to achieve optimal accuracy.

FAQ

How to decock a TenPoint crossbow?

TenPoint crossbows typically come with a decocking feature called ACUdraw De-Cock or ACUslide. Here’s how you can safely decock a TenPoint crossbow:

• Ensure that the crossbow is not loaded and there is no arrow in the barrel.
• Activate the decocking feature by following the specific instructions for your model. This may involve pressing a decock button or engaging the ACUdraw De-Cock mechanism.
• Slowly and carefully release the tension on the crossbow string by following the instructions provided with your specific model. This will safely decock the crossbow without firing an arrow.
• Keep your hands clear of the string and limbs while decocking to avoid any potential injury.

How to load a TenPoint crossbow?

Loading a TenPoint crossbow typically involves the following steps:

• Ensure that the crossbow is in a safe and unloaded condition.
• Place the crossbow on a stable surface or use a crossbow rest to hold it securely.
• Attach the cocking device, such as the ACUdraw or ACUslide, according to the manufacturer’s instructions. This device helps you to safely and easily cock the crossbow.
• Place an arrow or bolt into the barrel of the crossbow. Ensure that the nock of the arrow is properly aligned with the string and the fletching is facing away from the crossbow.
• Slide the arrow all the way back until the cock vane or fletching is in contact with the string.
• Ensure that the arrow is securely seated against the string and properly aligned with the rail.
• Double-check that the safety is engaged and the crossbow is pointed in a safe direction.
• Your TenPoint crossbow is now loaded and ready to be fired. Remember to follow all safety precautions and local regulations when using a crossbow.

How to silence a TenPoint crossbow?

To reduce the noise and vibration produced by a TenPoint crossbow, you can take the following steps:

• Use Dampeners: TenPoint crossbows often come with built-in dampeners or vibration reduction systems. Ensure that these are properly installed and functioning to minimize noise and vibration.
• Add Limb Dampeners: Limb dampeners can be added to the limbs of the crossbow to absorb vibrations and reduce noise. These dampeners are typically made of rubber or other vibration-absorbing materials.
• Install String Silencers: String silencers, also known as string dampeners or suppressors, can be added to the crossbow string to reduce noise and vibration. These are usually made of rubber or other noise-absorbing materials.
• Use a Dampening Pad: Placing a dampening pad or limb saver between the stock and your shoulder can help absorb vibrations and reduce noise when shooting.
• Check for Loose Components: Ensure that all components of the crossbow, such as screws, bolts, and accessories, are properly tightened. Loose components can contribute to noise and vibration.

How to lube a TenPoint crossbow?

Lubricating your TenPoint crossbow is important to ensure smooth operation and prevent premature wear. Here’s a general guide on how to lube a TenPoint crossbow:

• Flight Rail and Trigger Mechanism: Apply a small amount of TenPoint Flight Rail and Trigger Lube or a similar lubricating oil to the interior parts of the flight rail and trigger mechanism. This helps to keep them rust-free and operating smoothly. Follow the manufacturer’s instructions for the specific lubricant you are using.
• Cocking Device: Apply a small drop of oil on the ACUdraw or ACUdraw PRO bearings and on the drive shaft where the crank handle attaches. This helps to keep the cocking device functioning smoothly. Avoid applying oil to the ACUdraw or ACUdraw PRO gears, as they are self-lubricating.
• String and Cables: To protect the string and cables from fraying and dry rot, apply TenPoint Premium Lubricant with Foam Applicator or TenPoint String Wax and Conditioner directly to the cords. Reapply when the cords feel dry to the touch. Follow the manufacturer’s instructions for the specific lubricant or wax you are using.

How to adjust a TenPoint crossbow scope?

Adjusting a TenPoint crossbow scope may vary depending on the specific model and scope type. Here’s a general guide on how to adjust a TenPoint crossbow scope:

• Mounting: Ensure that the scope is securely mounted on the crossbow’s scope rail. Follow the manufacturer’s instructions for proper mounting procedures.
• Windage Adjustment: The windage adjustment controls the left or right movement of the crossbow’s point of impact. To adjust windage, use the windage adjustment screws or dials located on the scope. Turning the screws or dials in the appropriate direction will move the point of impact left or right.
• Elevation Adjustment: The elevation adjustment controls the up or down movement of the crossbow’s point of impact. To adjust elevation, use the elevation adjustment screws or dials located on the scope. Turning the screws or dials in the appropriate direction will move the point of impact up or down.
• Reticle Focus: Some scopes allow you to adjust the focus of the reticle to ensure a clear and sharp image. Look for an adjustable focus ring or eyepiece on the scope and adjust it until the reticle appears sharp and clear.
• Test and Fine-Tune: After making adjustments, it’s important to test the crossbow’s accuracy and make further adjustments if necessary. Take some test shots at a target and make additional windage and elevation adjustments as needed to achieve the desired point of impact.

How to wax a TenPoint crossbow?

Waxing the string and cables of your TenPoint crossbow helps to protect them from wear and prolong their lifespan. Here’s a general guide on how to wax a TenPoint crossbow:

• Clean the String: Before waxing, ensure that the string and cables are clean and free from debris. Use a soft cloth or brush to gently remove any dirt or residue.
• Apply Wax: Apply TenPoint String Wax or a similar crossbow string wax directly to the string and cables. Rub the wax onto the surface of the string and cables, ensuring even coverage. Pay extra attention to the areas where the string contacts the rail and the cables cross.
• Work the Wax: Use your fingers to work the wax into the string and cables. This helps to ensure that the wax penetrates the fibers and provides maximum protection.
• Remove Excess Wax: After working the wax into the string and cables, use a clean cloth to remove any excess wax. This helps to prevent buildup and keeps the crossbow clean.
• Regular Maintenance: It’s recommended to wax the string and cables of your TenPoint crossbow regularly, especially after extended use or exposure to harsh conditions. Follow the manufacturer’s recommendations for the specific wax you are using.

Where Is the Serial Number On Tenpoint Crossbow?

The serial number on a TenPoint crossbow can typically be found in one of the following locations:

The serial number may be engraved on the barrel or riser of the crossbow. It may also be located on the limb pocket or limb of the crossbow. Some TenPoint crossbows may have the serial number on the stock or grip of the crossbow.

What Nocks Do Tenpoint Crossbows Use?

TenPoint crossbows use Alpha-Nocks for their arrows. The Alpha-Nock is a specific type of nock designed by TenPoint that provides a secure and consistent connection between the arrow and the crossbow string. The Alpha-Nock can be used in any TenPoint, Wicked Ridge, or Horton Crossbow Innovations crossbow.

Where Are Tenpoint Crossbows Made?

TenPoint crossbows are proudly made in the United States. The company is based in Mogadore, Ohio, and their crossbows are manufactured in their facility in Mogadore. TenPoint is known for its high-quality craftsmanship and attention to detail in the production of their crossbows.

Who Makes Tenpoint Crossbows?

TenPoint Crossbow Technologies is the manufacturer of TenPoint crossbows. The company was founded in 1994 and has since become a leading manufacturer of high-quality crossbows and accessories. TenPoint is known for its innovative designs, superior performance, and commitment to customer satisfaction.