crossbow stuck on safety

Crossbow Stuck On Safety? (5 Reasons and 7 Tips)

Crossbow stuck on safety! They are truly powerful and remarkable weapons, however, they can also be tricky to use if you’re not familiar with them. One of the most common issues that crossbow users face when firing their weapon is that it’s often stuck on safety, which can be quite frustrating to deal with. In this article, you will learn how to solve the issue of crossbows stuck on safety.

crossbow stuck on safety

Reasons Why Your Crossbow Stuck On Safety

Your crossbow won’t fire if the safety is engaged, which can be frustrating on the field or during practice. Here are different reasons why your crossbow may be stuck on safety:

Something is blocking your string

The string is the part of the crossbow that propels the arrow forward. If something is blocking it, the string can’t do its job and the arrow won’t fly. The most common culprits are leaves, twigs, or even just dirt and grime build-up. To fix this, simply clear away whatever is blocking the string and try again.

The bolt is broken

A broken bolt is one of the most common reasons why your crossbow may be stuck on safety. If the string is not properly seated in the nock, or if the nock itself is damaged, it can cause the string to break. In addition, if the arrow is not properly secured in the rest, it can also cause the string to break. Finally, if the bow is not strung correctly, it can also lead to a broken string.

Tight limb bolts

 These bolts hold the limbs of the crossbow in place. If they’re too tight, it can cause the safety to get stuck. To fix this, simply loosen the limb bolts and see if that solves the problem. If not, try the next one. If the problem persists after loosening all four bolts then something else may be wrong with your crossbow.

Your release is improperly adjusted

If your release is not properly adjusted, it can cause the crossbow to get stuck on safety. The release should be adjusted so that it is snug against the trigger guard. If it is too loose, the crossbow may not fire correctly. It will also make it difficult for you to cock the crossbow. 

The firing mechanism has failed or is malfunctioning

If the crossbow is cocked and the safety is on, but the crossbow won’t fire, it’s likely due to a failure or malfunction in the firing mechanism. This could be caused by several things, including a broken string, a misaligned trigger, or a jammed bolt. If you’re not sure what’s causing the problem, take your crossbow to a qualified technician for repair.

Crossbow stick on Safety? Here is the Solution

Following are some important tips to solve this issue:

Wiggle it

The first thing you want to do is try wiggling the crossbow. This can sometimes dislodge the safety and get it back into the firing position. If this doesn’t work, don’t worry, there are still a few things you can try. One of them is trying to hold down the release latch while pulling back on the bowstring with your hand. 

If that doesn’t work, then try holding down the safety button while pulling back on the bowstring with your hand.

Spray it with a penetrating oil

If your crossbow is stuck on safety, the thing you should try is spraying it with penetrating oil. This will help loosen up any parts that may be sticking and make it easier to move the safety lever. Just be sure to use a light oil so that it doesn’t damage the crossbow. When I was dealing with this issue myself, I used some lightweight machine oil from my garage. 

In most cases, this should do the trick. However, if it still won’t budge after giving it time to soak in or apply more force than usual, then it’s time to move on to one of these other solutions.

Try some lubricants

Most lubricants will do the trick, but if you’re having trouble finding one that works, WD-40 or 3-in-1 oil are both good options. Just be sure to use a lint-free cloth when applying the lubricant, and give the string a good wipe-down afterward. If this doesn’t work, try using lighter fluid to remove any dirt and grime on the arrow shaft before shooting again. If none of these tips works for you, it might be time to contact your manufacturer for a replacement safety set.

Use heat

One of the best ways to try and fix this issue is by using heat. This can be done by either using a hair dryer or by submerging the crossbow in hot water. Be careful not to use too much heat, as this could damage the crossbow. If the crossbow is made of wood, be especially careful with the heat as wood can easily warp.

Leverage your body weight 

If your crossbow is stuck on safety and you can’t seem to get it unstuck, one thing you can try is leveraging your body weight. Sit on the ground with your legs extended in front of you and place the crossbow across your lap. Then, push down with all your might until the lever pops back into place. If that doesn’t work, try using a heavy object like a rock or a log to press down on the lever.

Wrap it with the wet cloth

If your crossbow is stuck on safety, one quick and easy fix is to wrap the area around the safety with a wet cloth. This will help lubricate the area and allow you to move the safety lever more easily. Just be sure to dry off the crossbow completely before using it again. And be careful when shooting after this as there may still be some moisture left in the trigger mechanism. 

Call your supplier

Another thing you should do to resolve this problem is to call your supplier. They may be able to help you troubleshoot the issue over the phone or send you replacement parts. Other times, they may require that you ship the product back for repair. If it’s an older model, they might offer you a newer model at a discounted price or offer to trade in your old one for credit toward a new one.

You can soundproof your crossbow

How to turn off the safety on Barnett’s crossbow?

Barnett crossbow comes with an auto safety that prevents the bow from being accidentally fired in the event of accidental or careless contact with the string. If you’ve somehow managed to lock your Barnett crossbow’s safety, this video tutorial shows you how to turn off the Barnett crossbow’s safety and get back to target practice! 

Most Barnett crossbows have the same mechanisms and settings, so learning how to turn off the safety on the Barnett crossbow will allow you to do it on most other models as well. Take care and be safe out there.

Conclusion

Whether you’re a new or experienced crossbow user, you may at some point find yourself staring down the barrel of your crossbow on safety when you’re trying to make it ready to fire. If you aren’t prepared with the right tools and knowledge, this can be frustrating. But following this guide you can solve this issue very easily.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *